Front Left Air Suspension Strut for Audi Q7 4L VW Touareg 7P and Porsche Cayenne 92A

1. Cross-Platform Vehicle Fitment

The KU-FV-06-003 air suspension strut is designed for the front-left position of selected Audi Q7 4L, Volkswagen Touareg 7P and Porsche Cayenne 92A models equipped with the corresponding factory air suspension and electronically controlled damping system.

OE number 7P6616039N identifies the front-left assembly. Compatibility depends on the production date, engine, suspension configuration and vehicle option codes, so buyers should verify the OE number and VIN before ordering.

2. Adaptive Damping and Ride Control

• Electronically Controlled Damping: Supports real-time damping adjustments made by the compatible suspension control system.

• Balanced Suspension Response: Helps control compression and rebound during braking, acceleration, cornering and travel over uneven surfaces.

• Road-Impact Absorption: Reduces vibration and impact transferred from the road surface to the vehicle body.

• Driving-Mode Support: Works with the corresponding suspension electronics to support suitable comfort and handling settings.

3. Ride-Height and Pneumatic Operation

• Automatic Leveling Support: Operates within the factory air suspension system to help maintain the programmed vehicle height under changing loads.

• Ground-Clearance Adjustment: Supports compatible ride-height settings for normal driving and suitable off-road conditions.

• Reinforced Rubber Air Sleeve: Designed to contain pressurized air while allowing repeated suspension movement.

• Integrated Strut Assembly: Combines pneumatic spring support and shock-absorbing functions in one front suspension component.

4. Installation and System Inspection

• Front-Left Configuration: Mounting points, pneumatic connection and electrical interface are arranged specifically for the front-left position.

• OE Number Verification: Confirm that 7P6616039N matches the original strut before ordering.

• Suspension-System Inspection: Check the compressor, valve block, air reservoir, pressure lines, height sensors and electrical connectors during replacement.

• Leak and Calibration Check: Test the pneumatic circuit for leakage and perform ride-height calibration after installation when required.

• Professional Installation: Replacement should be completed by technicians familiar with high-pressure, electronically controlled air suspension systems.